DOWNLOAD DATA SHEET
Azionamenti per Motori Passo Passo Motori Passo Passo Sistemi Brushless Presentazione Aziendale
SUCHEN
Technische Daten
MIND T Endstufene

MIND T is the name of a series of ministep bipolar chopper drives with an on-board programmable motion controller that can be used for the interfacing with a central control system or as an independent unit.

MIND T series drives are housed in a metallic box, 180 x 173 x 53 mm format, suitable for wall mounting.

They require a single DC supply voltage and do not need external fans: accordingly, they are ideal both for mounting inside a metallic electrical cabinet and for stand-alone applications.

R.T.A. experience, together with a careful design both of drive and software for these specific purposes, has led to a component offering high reliability, best performances, great ease of use at competitive costs.

A broad range of available current/voltage values, specific instructions set and the availability of programmable inputs and outputs optimize the use of MIND T series drives with a wide variety of stepping motors and in a large number of applications.

Utilities working in Windows are available in order to ease motion programs development by the user.

  • Operation at 400, 800, 1600, 3200 and 500, 1000, 2000, 4000 steps/revolution.
  • Electronic resonance damping circuit to ensure acoustic noise and mechanical vibrations reduction at low and medium speed.
  • Wide range of operating voltages and motor phase currents setting. By means of a DIP-SWITCH up to four possible equidistant values between Inf. min. and Inf. max. can be set.
  • Communication through RS232 or RS485 serial line set by the user; up to 48 drives can be connected on a single serial line (RS485). One instruction can be broadcasted to all drives.
  • Possibility to control the execution of 16 previously stored motion programs through hardware inputs. Accordingly, the drive can be used in stand-alone applications, without serial connection.
  • Ten inputs and four outputs, all optically insulated. Among them two inputs and two outputs are freely programmable.
  • STEP OUT and DIRECTION OUT output to use with a SLAVE drive.
  • Memory of 128 instructions kept also at drive switched-off.
Vdc Inf. min. Inf. max. Dimensions
(VOLT) (AMP) (AMP) (mm.)
MIND T2 from 55 to 85 2.3 4 180 x 173 x 53
MIND T3 from 55 to 85 5.7 10 180 x 173 x 53
MIND T4 from 95 to 140 4.55 8 180 x 173 x 53
MIND T5 from 120 to 180 6.7 12 180 x 173 x 53
MORE INFORMATIONS ON SOFTWARE
It is available a STARTER KIT with suitable cables and software running in Windows® . It is intended to ease devevelopping of motion programs by user.